Completed the AC->DC section.

The power section consists of 2 rectifiers, one each for the +15V and -15V rails.
The filter capacitors are Panasonic FM 1500µF 35V metal foil caps and a 1µF Epcos Polyester film cap.
The linear regulators are the 7815 for the positive rail and the 7915 for the negative rail.
The reservoir caps are Panasonic FM 3300µF 16V metal foil caps and a 1.2µF Vishay-Dale polyester cap.
The dual TO-220 heatsink is soldered to the board, and the regulators are stuck to it by pressure and Arctic Silver Ceramique thermal paste.

The 1/4" headphone jack is not part of the power section, but it is there because of it's location on the front panel and so it can support the board while mounted to the front panel.